DMX Wall Station Controller | 8 Scenes

Model *
Color *

Current stock: 0

The Springtree DMX Wall Station is a self-contained DMX Controller that looks and operates like a light switch. It is wall mountable, for easy everyday access. It receives and sends DMX data, allowing you to preset 8 scenes with built-in fade times.

The Wall Station Models 

The SM-8 is the master controller needed for the system. It sends and receives DMX data. The SM-8 can operate alone, or with an additional slave controllers.

The SS-8 is the slave controller for creating additional control points around a venue. Multiple slave controllers can be connected via Cat-5.   

How it Works


Easy to Program!

  1. Hold down buttons 1 and 8 to enter programming mode (light will turn red).
  2. Set desired look on lighting console.
  3. Press desired preset button 1-8. Light will flash. Scene is stored.
  4. Set new look on lighting console.
  5. Press another unused button or record over existing scene by selecting button. Up to 8 scenes can be recorded.
  6. Repeat.
  7. Hold down buttons 1 and 8 to exit programming mode.  


Why Purchase Our Wall Station

The best thing about our wall stations is how easy they are to install! Using slave stations is as easy as running Cat5, which is more affordable than DMX cables. This allows you to put multiple control points around a venue without breaking the bank. One master station can be used with up to 5 slave stations. Other popular control stations on the market use radio frequency, which is convenient when it works, but unreliable when used in facilities (like schools) that have cinderblock walls. Cat5 is more reliable, and works in any location! 
Also check out: Our DESK STATIONS are the simplest every day control option on the market! No installation needed. You just add it between your lighting console and your lights. It can even sit right next to your console!
We offer great customer service when issues arise, and for installation questions. 


Wall Station Features

  • Self-contained preset station with 8 scene capacity
  • Built-in fade time presets
  • Up to 3 slave units
  • DMX-512 output
  • DMX input snapshot 


  • Power Input: 9-24VDC (ships with a 12VDC power supply)
  • Weight SM-8 & SS-0: .2 lbs (90.7g)

Click Here to View Manual!

5 Reviews

Jonathan Miller Jun 1st 2019

Just what I was looking for!

We redid our light system in our church recently, (entire new dimming system) making our old architectural switches obsolete and unusable. I was racking my brain trying to decide how to make things work in the new space and I stumbled upon your product. It was much more affordable than any other options I found.

Delivery was prompt, installation instructions were easy to follow and programming it couldn't be simpler. The white color option looks nice and clean in our space as well. I bought a master controller which I installed next to my light control board in the sound booth and connected a slave controller near the room entrance for instant control upon entering the room.

The lockout feature when the board is running lighting cues worked exactly as I had hoped.

Vest Richard May 27th 2019

Perfect for my home theater

I used DMX control when I built my home theater to give maximum control of lighting with minimal AC wiring. The only issue I had was accessing the DMX controller which was located in the equipment closet when entering the room.
With your DMX Wall Station Controller, mounted on the wall by the door and allows selection of 8 preprogrammed scenes upon on entering or leaving the room, making the DMX controller obsolete (except for making change the scenes).
Just a thought, An additional product that would be perfect for a home theater would be a wireless slave stations.

Add a Review